After checking out all the commercially pet steps available, the hubby decided to go all DIY and make them a custom set of stairs. I’m sure if you search you can find some free online plans, but be sure you take into account your own pup’s size and shape and change them as necessary. Also, note the height and width you have to work with within the location you’ll be using them in.
[amazon_link asins=’1579908535,1929242077,1589233085,0789203731,1589235665,1943876401,0847860906,1505658330′ template=’ProductCarousel’ store=’shmyje-20′ marketplace=’US’ link_id=’253aa3ca-3ae2-11e8-b170-e581e23d91ca’]
There are also books available for DIY pet projects including Black & Decker’s 24 Weekend Projects for Pets: Dog Houses, Cat Trees, Rabbit Hutches & More if you’re not ready just to throw something together.
The hubby just pulled out some scrap lumber – 2×4’s and trim left over from the remodeling – and came up with what he thought was a set of stairs with deeper treads and a lower rise on the stairs for our 5 pound Maltese and 10 pound Pomeranian. His goal was to size the stairs to their body size, so he measured from the floor to their knees to estimate the height (rise) of the steps first. Then had them step up onto a cardboard box to estimate how much stair depth they needed to comfortably get their front and back legs both on the same stair. Then he divided the height of the bed by the rise and that gave him the number of stairs he needed.
He cut the large side pieces (stringers) and then the treads along with a back piece to finish them off. He used screws and glue to put them all together.
Don’t know how to make stairs? Check out How to Build Stairs – Basic Stairs Anatomy
The steps are nailed together, and yesterday we tried them out. The girls adjusted well and if I’d been consulted on the design, which I was not, I would have made the top stair twice the length. I can see one of the girls sitting at the top blocking the other from getting up and/or down – that’s what our dogs do. Plus should they take a running start, which was necessary for them to get up our old stairs, there’s some slop at the top for them to stop within without falling off the end.
The stairs need the nail holes filled, and then we’ll be painting them. The hubby used decorative trim to finish them off. The trim isn’t necessary, but it makes them look better, and it’s also practical. It gives the pup’s claws something to catch on, and it’ll help hold the carpet in place (we’ll likely use Velcro to attach them for easy removal for cleaning).
We’ll be covering the stairs with some leftover Flor carpet tiles from another project because they’re easy to cut, and they can be removed, washed, dried, and then replaced.
These homemade DIY dog stairs are phenomenally better than the plastic version we had before, and they fit perfectly because they were designed for the space. I only hope that once they’re in place, we can convince the big dog that it doesn’t mean he can get up on the bed. After 12 years of it being his spot, it’s hard to tell him he’s no longer welcome.
So how does the cost compare to purchased stairs? The closest comparison is a value line product that retails for $72 with the manufacturer noting that they have low-quality carpet on them, so the screws show. Stairs closer in size and quality to ours run $168. I think I’ll stick with the homemade version for now because we had the lumber on hand left over from other projects, so our cost was just our time.
[amazon_link asins=’B01739JJ84,B003SZS5JW,B00OSB6HX6,B00CGYE0IQ,B000NNHC00,B00CGYDZHS,B003SZSYAW’ template=’ProductCarousel’ store=’shmyje-20′ marketplace=’US’ link_id=’5c05eef9-3ae3-11e8-90a8-2b907695e730′]
Not ready to go the DIY route? Or want something that takes up a little less space? We use a high-density foam pet stair in the living room. The girls have no problem with them. Gracie is about 6 lbs. I wouldn’t use them for dogs over 15-20 pounds as I think they become unstable at that point.
This content was originally published here.